Sadler Live Roller Belt Driven Conveyors
|
|
|---|---|
| Item | Imperial and (Metric) |
| Belt Width: | 12" (305 mm) |
| B.F.Width: | 48, 60, 72, 84" (1.20, 1.53, 1.83, 2.14 M) |
| Overall Width: | 53, 64, 76, 88" (1.35, 1.63 , 1.93, 2.24 M) |
| Frame Rails: | 6 x 2 x 3/16" (133 x 50 x 5 mm) structural steel channel # S68. 3" (75mm) steel channel cross braces. 11/16" (17mm) hex holes on 3" (75mm) centers. Pressure roller section: 2 x 2 x 3/16" (50 x 50 x 5 mm) steel angle rails, 15" (380 mm)BF. |
| Frame Capacity: | 800 lb/linear ft (1200 kg/M) when supported on 10 ft (3.0 M) centers |
| Frame Lengths: | 7'6", 5'-0", 2'-6" (2.3, 1.5, 0.75 M). Other lengths MTO. |
| Rollers-Bed: | 2.5" dia. x 11 Ga x 11/16" or 2.5" dia. x 14 Ga x
7/16" (65 mm dia. x 3 mm x 17 mm or 65 mm dia. x 2 mm x 11 mm). Optional lift-out floating rollers 2.5" dia. x 11 Ga (65 mm dia. x 3 mm) steel tubing |
| Roller Centers: | 1.5 " increments on 3, 4.5, 6. 9" (38 mm increments on 76, 114, 152, 230 mm) Returns on 5 ft (1.5 M) centers |
| Roller-Pressure: | 1.9" x 16 Ga x 7/16" (50 mm dia. x 1.6 mm x 11mm) spring loaded hex axles on 9" and 5' (230 mm and 1.5 M) centers respectively. |
| Bearings: | Drive and terminal pulleys have precision ball-type lubed for life. Sadler rollers have commercial ball-type, grease packed. |
| Axles: | 11/16" (17 mm) hexagonal steel spring loaded. |
| Roller Capacity: | 11 Ga roller = 600 lbs @ 48" BF and 200 lbs @ 84" BF (275 kg @
1.2M BF and 90 kg @ 2.1 M BF). 14 Ga roller = 100 lbs @ 48" (50 kg @ 1.2M BF.) |
| Belt: | 12" (300 mm) 120 PVC-COS with alligator lacing. Capacity 120lbs./inch width (21 kg/cm) |
| Belt Speeds: | 60 FPM is standard with 30 or 45 FPM as optional (20 MPM is standard with 10 or 15 MPM as optional) |
| Drive Sizes: | 0.5, 1.0, 2, 3 HP DP, TEFC or explosion proof (0.37, 0.75, 1.5, 2.25 Kw DP, TEFC or explosion proof) |
| Accumulation Zones: |
Air lifts controlled by PC or air logic in 5 (1.5M) or 7'6" (2.3M) increments. |
| Drive: | 7" (180mm) dia. lagged crowned pulley with 13/16" (30 mm) live shaft, pillow blocks, chain drive, speed reducer and motor. 1 HP (.75Kw) to 30' (9.1 M) and 2 HP (1.5 Kw) to 50' (15.2 M) long conveyors. Terminal and take-up pulleys 3.5" (90 mm) x 1" (25 mm) dead shafts. |
| Guards-Safety: | Chain drive and V belt guards when applicable |
| Supports: | 4" (100mm) wide channel support |
| Finish: | Sadler Medium Blue industrial machinery enamel on steam cleaned phosphated steel. |
| Controls: | Individual units or completely automated with Sadler motor control panels and PLC's |
| Miscellaneous: | Photo cells, brakes, electronic traffic control, centering, singlating or metering devices. |
| Complimentary Equipment: |
Sadler manufacturers a full range of push or intermeshing transfers, stepping turntables, transfer cars to compliment this live roller zone accumulation conveyor |